Customer: AGUAS DE VALENCIA
Application: Cogeneration
– Unitary Flow: 150 m3/h of Biogas ( 70% CH4+30% CO2, < 200 ppm H2S)
– Working Pressure: 60 mbar(g)
– Inlet Temp.: 35 ºC
– Dew Point: +5 ºC
Solution, 2 Steps:
– Units:1
– First Step: Heat Exchanger ( St.St) + Condesate Separator ( St.St)
– Second Step: Chiller
– Model: RH-40/1500 + ChillSec-S 141 ( 80.883)
– Country: Spain
Customer: ANFRIXA
Application: Cogeneration
– Unitary Flow: 2000 m3/h of Biogas ( 45% CH4+35% CO2,20% O2, traces of H2O, < 500 ppm H2S)
– Working Pressure: 300 mbar(g)
– Inlet Temp.: 70 ºC
– Dew Point: +5 ºC
Solution:
– Units:1
– Heat Exchanger ( St.St) + Condesate Separator ( St.St)
– Model: RH-700/2000 ( 80.895)
– Country: Spain
Customer: CADAGUA
Application: Cogeneration
– Unitary Flow: 375 m3/h
– Working Pressure: 200 mbar(g)
– Inlet Temp.: 45 ºC
– Condenser Water: 2.4 m3/h
– Dew Point: +5 ºC
Solution:
– Units:1
– Refrigerator Dryer , ExProof
– Model: FD-255-WA-E ( 80.187)
– ATEX Instrumentation
– Country: Spain
Customer: DISEPROSA
Application: Cogeneration
– Unitary Flow: 900 m3/h
– Working Pressure: 13/2 Bar(g)
– Inlet Temp.: 30 ºC
– Condenser by Air
– Dew Point: +5 ºC
Solution:
– Units:1
– Refrigerator Dryer , ExProof
– Model: FD-305-B-Ex ( 80.740)
– ATEX Instrumentation, Construction in St.St.304
– Country: Spain
Customer: ECOPARC DEL MEDITERRANI
Application: Cogeneration
– Flow: 1,300 m3/h
– Working Pressure: 140 mbar(g)
– Inlet Temp.: 58 ºC
– Outlet Temp.: 26 ºC
– Dew Point: +5 ºC
Solution:
– Units :1
– Heat Exchanger (RH-450/1500/E )+ Chiller (CPA-1131)
– Stainless Steel + ATEX Zone
– Country: Spain
Customer: EMTE MEDIO AMBIENTE
Application: Cogeneration
– Flow: 1,300 m3/h
– Working Pressure: -150 mbar(g)
– Inlet Temp.: 40 ºC
– Outlet Temp.: 5 ºC
Solution:
– Heat Exchanger (RH-300/2000/E)+ Chiller (CPA-1361) + Condesate Separator
– ATEX Instrumentation
– Stainless Steel Material Construction
– Country: Spain
Customer: GASGREEN S.A- Eng. Grupo Luxia
Application: Cogeneration
– Flow: 2500 m3/h
– Working Pressure: -100 mbarg
– Inlet / Outlet Temp.: 35 ºC / 5ºC
Solution: 2 steps
– First Step: Heat Exchanger + Condensate Separator of Biogas ( St.St)
– Second Step: Chiller
– Model: RH-280-3000-E + ChillSec-S 220 ( 80.867)
– Country: Ecuador
EPC: INBIOGAS
Application: Cogeneration
– Flow: 600 m3/h & 1,000 m3/h
– Working Pressure: -125 mbarg / 125 mbarg
– Inlet Temp.: 30 / 45 ºC
– Outlet Temp.: 5 / 25 ºC
Solution:
– Units: 2
– Heat Exchanger + Chiller: Models: (RH-320-1200-E + CPA-571 ) /( RH-170-850-E + CPA-61)
– Stainless Steel Material Construction
– ATEX Instrumentation
– Country: Spain
EPC: OMS-SACEDE
Application: Cogeneration
– Flow: 150 Nm3/h
– Working Pressure: -60 mbar(g)
– Inlet Temp.: 35 ºC
– Condensation by air
– Dew Point: +3 ºC
Solution:
– Refrigeration Dryer (Model: FD-255-BE) + Evaporator ( StSt)
– Plug & Play. Controller Included
– ATEX Zone
– Country: Spain
Customer: CADAGUA
Application: Cogeneration
– Unitary Flow: 211 m3/h
– Working Pressure: 25 mbar(g)
– Inlet Temp.: 30 ºC
– Dew Point: +10ºC
Solution:
– Units:1
– Refrigerator Dryer
– Model: FD-900BL-SR ( 80.771)
– Country: Spain
Application: Biogas Treatment
– Flow: 375 Nm3/h
– Working Pressure: 200 mbar(g)
– Inlet Tº: 45ºC
– Dew Point:+3ºC
– Condenser Water: 2.5m3/h
Solution:
– Units: 1
– Revamping Refrigerator Dryer + New controller (FD-255-W)
– Country: Spain
Ref: 80.872
Contractor: Carburos Metálicos
Application: N2O
Flow: 10,2 Nm3/h
Working Pressure: 50 m bar(g)
Maximum Pressure: 2 bar(g)
Inlet Tª: 30 ºC
Solution: Separator Prefilter 1 µ.
CSN-03 PN6
Placed: La Pobla de Mafumet (Spain)
EPC: YPF
End User: Repsol Petróleo. Puerto Llano ( Ref: 80627)
Applicaction: Service & Instrumentaion control
– Segment Market: Chemical / O&G
– Flow: 4,477 Nm3/h
– Working Pressure: 7.5 Barg
– Inlet Tº: 37ºC
– Dew Point: -40ºC
Solution:
– Units: 1
– Prefilter + Heated Adsorption Dryer ( ED-14)+Post Filter
– ASME VIII Div 1 , ATEX Instrumentation
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Spain
End User: ILBLOC’S Luba Base Oils. Cartagena
Applicaction: Service & Instrumentaion control
– Segment Market: Chemical
– Flow: 850 Nm3/h
– Working Pressure: 8,2 Barg
– Inlet Tº: 50ºC
– Dew Point: -40ºC
Solution:
– Units: 1
– Prefilter + Adsorption Dryer ( HD-10)+Post Filter
– ASME VIII Div 1 , ATEX Instrumentation
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Spain
End User: ILBLOC’S Luba Base Oils. Cartagena
Applicaction: Service & Instrumentaion control
– Segment Market: Chemical
– Flow: 200 Nm3/h
– Working Pressure: 8,2 Barg
– Inlet Tº: 50ºC
– Dew Point: -40ºC
Solution:
– Units: 1
– Prefilter + Adsorption Dryer ( HD-06)+Post Filter
– ASME VIII Div 1 , ATEX Instrumentation
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Spain
Project: Siddhirganj POWER Plant ( Bangladesh)
EPC: ISOLUX / IDOM
Application: Service & Instrument control
– Segment Market: Energy/ Chemical
– Flow: 312 Nm3/h
– Inlet Tº: 37ºC
– Dew Point: -40ºC
Solution:
– Units: 2 ( Stainless Steel )
– Pre filter +Heatless Adsorption Dryer ( HD-04) + Post Filter
– ASME VIII Div 1, ATEX Control
– Instrumentation & Control Included
– Plug & Play Solution
-Country:Bangladesh
Project: Siddhirganj POWER Plant ( Bangladesh)
EPC: ISOLUX / IDOM
Application: Service & Instrument control
– Segment Market: Energy/Chemical
– Flow: 1,380 Nm3/h
– Working Pressure: 7 Barg
– Inlet Tº: 45ºC
– Dew Point: -40ºC
Solution:
– Units: 2 ( Stainless Steel)
– Pre filter + Heatless Adsoprtion Dryer (HD-04 )+ Post Filter
– ASME VIII Div 1, ATEX Control
– Instrumentation & Control Included
– Plug & Play Solution
-Country: ( Bangladesh)
EPC: FLUOR
Customer: Repsol petróleo. Cartagena
Application : Service & Instrumentation Control
– Segment Market: Chemical / O&G
– Flow: 4,600 Nm3/h
– Working Pressure: 7.9 Barg
– Inlet Tº: 40ºC
– Dew Point: -57ºC
Solution:
– Units: 1
– Duplex Pre-filter + Heated Adsoprtion Dryer (TP-2000-DHP) + Duplex Post Filter.
– Zero purge Solution
– Plug & Play Solution. Controller Included
– ASME VIII Div 1 + U stamp, ATEX Instrumentation
– Country: Spain
Project: Gran Chaco ( Bolivia)
EPC: TECNICAS REUNIDAS
Application: Service & Instrument control
– Segment Market: Chemical / O&G
– Flow: 1.310 Nm3/h
– Working Pressure: 7.3 Barg
– Inlet Tº: 53ºC
– Dew Point: -40ºC
Solution:
– Units: 2
– Pre filter +Heatless Adsorption Dryer (HD-13) + Post Filter
– ATEX Instrumentation
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Bolivia
Customer: Air Products
Application: Gas Treatment. Dried of N2O
– Unitary Flow: 350 Kg/h
– Working Pressure: 27 bar(g)
– Inlet Temp.: 30 ºC
– Dew Point: -55ºC
Solution:
– Units:1 Assembled Skid
– Inlet Filter + Adsorption Dryer External heating system+ Outlet filter
– Material: St St 304 fro towers, filters , pipes and valves
– Model: TM-55-DHP/E
– Country: Spain
Customer: Air Products
Application: Gas Treatment. Dried of N2O
– Unitary Flow: 350 Kg/h
– Working Pressure: 27 bar(g)
– Inlet Temp.: 30 ºC
– Dew Point: -55ºC
Solution:
– Units:1 Assembled Skid
– Inlet Filter + Adsorption Dryer External heating system+ Outlet filter
– Material: St St 304 fro towers, filters , pipes and valves
– Model: TM-55-DHP/E
– Country: Spain
Customer: TAMINCO ( International Manufacturer of Alkylamines and derivates )
Application: UF Membrane protection
– Segment Market: Chemical / Water
– Use: Process Water
– Unitary Flow: 250 m3/h
– Water Quality: Canal Water
Solution:
– Units: 1
– Automatic Hydraulic Self Cleaning Filter (AF-800) – Skid Mounted
– Filtration Degree: 120 microns
– Material: CS Body , StSt316L Internals
– Country: Mexico
The Need: Pre treatment for Ultra Filtration Membranes
– The plant utilizes Canal water treated to a level of Ultra Pure Water to ensure reliability of production process.
– The client’s engineering team has defined the use of Ultra Filtration membranes as the main treatment method with a requirement to protect the UF membranes from blockage.
The Solution: AF-800 Automatic hydraulic filters
– Taminco selected the Yamit Automatic Hydraulic self cleaning filters as – it’s UF pre-treatment solution.
– The power consumption of the filter is significant low, due to the use of the hydraulic power of the water for cleaning
– Due to the high quality of the filtered water, the UF membranes were able to perform for long periods with less backwash sequences and minimum CIP procedures.
End User: TIRME ( Managment of Urban Waste)
Applicaction: Service & Instrumentaion control
– Flow: 1.320 Nm3/h
– Working Pressure: 7 Barg
– Inlet Tº: 35ºC
– Dew Point: -40ºC
Solution:
– Units: 1
– Prefilter + Heated Adsorption Dryer ( ED-08)+Post Filter
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Spain
Project: Siddhirganj POWER Plant ( Bangladesh)
EPC: ISOLUX / IDOM
Application: Service & Instrument control
– Segment Market: Energy/ Chemical
– Flow: 312 Nm3/h
– Inlet Tº: 37ºC
– Dew Point: -40ºC
Solution:
– Units: 2 ( Stainless Steel )
– Pre filter +Heatless Adsorption Dryer ( HD-04) + Post Filter
– ASME VIII Div 1, ATEX Control
– Instrumentation & Control Included
– Plug & Play Solution
-Country:Bangladesh
Project: Siddhirganj POWER Plant ( Bangladesh)
EPC: ISOLUX / IDOM
Application: Service & Instrument control
– Segment Market: Energy/Chemical
– Flow: 1,380 Nm3/h
– Working Pressure: 7 Barg
– Inlet Tº: 45ºC
– Dew Point: -40ºC
Solution:
– Units: 2 ( Stainless Steel)
– Pre filter + Heatless Adsoprtion Dryer (HD-04 )+ Post Filter
– ASME VIII Div 1, ATEX Control
– Instrumentation & Control Included
– Plug & Play Solution
-Country: ( Bangladesh)
Application: Air & Instrumentation
– Segment Market: Energy
– Flow: 1.920 Nm3/h
– Working Pressure: 7 Barg
– Inlet Tº: 40ºC
– Dew Point:-20ºC
Solution:
– Units: 2
– Revamping Heated Adsorption Dryer plus filters+ New controller (ED-10)
– Country: Spain
Application: Air & Instrumentation
– Segment Market: Energy
– Flow: 1.200 Nm3/h
– Working Pressure: 7 Barg
– Inlet Tº: 40ºC
– Dew Point:-20ºC
Solution:
– Units: 4
– Revamping Adsorption Dryer plus filters+ New controller (ED-08)
– Country: Spain
Customer: ABC
Application: PET BLOWING
– Unitary Flow: 1000 m3/h
– Working Pressure: 50 mbar(g)
– Dew Point: +2 ºC
Solution:
– Units:1
– Refrigerator Dryer FD-060-WHN
– Country: Spain
AIR/Beverage – ITR
End user: Font Salem – DAMM Group
Application: CO2 Recovery
– Unitary Flow: 1000 Kg/h
– Working Pressure: 19 Bar(g)
– Inlet Temperature: 35ºC
– Dew Point: -60ºC
Solution:
– Units:1
– Adsorption Dryer ( ED-08/E)+ Actived Carbon ( DS-250/E) + Filter ( SS304L)
– Country: Spain
AIR/Beverage – ITR
End user: Font Salem – DAMM Group
Application: CO2 Recovery
– Unitary Flow: 1000 Kg/h
– Working Pressure: 19 Bar(g)
– Inlet Temperature: 35ºC
– Dew Point: -60ºC
Solution:
– Units:1
– Adsorption Dryer ( ED-08/E)+ Actived Carbon ( DS-250/E) + Filter ( SS304L)
– Country: Spain
Project: Ref 8.359
Customer: B.A VIDRIO
Application: Process Air
– Unitary Flow: 10,500 Nm3/h
– Working Pressure: 3.5 bar(g)
– Inlet Tº: 35 ºC
– Condenser Water: 11 m3/h
– Dew Point: + 3 ºC
Solution:
– Units: 2
– Refrigerator Model: FD-12005-W . Controller Included
– Plug & Play Solution
– Country: Portugal
Project: Reference 80.190
Customer: VERALLIA Group
Applicaction: Process Air
– Flow: 14.000 Nm3/h
– Working Pressure: 3,2 bar(g)
– Inlet Tº: 40 ºC
– Condenser water: 30 m3/h
– Dew Point: + 3 ºC
Solution:
– Units: 1
– Refrigerator Dryer (FD-6500-W PN4 ). Controller included
– Country: Spain
Project: Reference 80.734
Customer: VERALLIA Group
Application: Process Air
– Unitary Flow: 9.000 Nm3/h
– Working Pressure: 4 bar(g)
– Inlet Tº: 35 ºC
– Condenser Water: 19.5 m3/h
– Dew Point: + 3 ºC
Solution:
– Units: 1
– Refrigerator Dryer ( FD-3005-WE). Controller Included
– Country: Spain
Project: Reference 80.640
Customer: VIDRALA GROUP
Applicaction: Process Air
– Unitary Flow: 13.200 Nm3/h
– Working Pressure: 3.6 bar(g)
– Inlet Tº: 120 ºC
– Condenser Water: 33.5 m3/h / Cooling Water: 29 m3/h
– Dew Point: + 3 ºC
Solution:
– Units: 1
– Refrigerator Dyer (FD-6005-W PN4) + Air Exchanger ( EH/RH-6005 )
– Controller Included
– Plug & Play Solution
– Country: Spain
Project: Reference 80.679
Customer: VIDRALA GROUP
Applicaction: Process Air
– Unitary Flow: 8.540 Nm3/h
– Working Pressure: 3.5 bar(g)
– Inlet Tº: 120 ºC
– Condenser Water: 22 m3/h / Cooling Water: 27 m3/h
– Dew Point: + 3 ºC
Solution:
– Units: 1
– Refrigerator Dryer ( FD-3505-WE) + Air Exchanger (EH/RH-3505)
– Controller Included
– Plug & Play Solution
– Country: Spain
Project : Reference 80.831 and 80.832
Customer: VIDRALA Group
Applicaction: Process Air
– Unitary Flow: 10,500 Nm3/h
– Working Pressure: 3.5 bar(g)
– Inlet Tº: 35 ºC
– Condenser Water: 11 m3/h
– Dew Point: + 3 ºC
Solution:
– Units: 2
– Refrigerator Dryer (FD-3500-WE) . Controller Included
– Plug & Play Solution
– Country: Belgium
Market: Glass Industry
Solution:
– Equipment: Oxygen Generator
– Units: 1
– Flow: 30 Nm3/h
– Purity: 95%
– Country: Brasil
EPC: YPF
End User: Repsol Petróleo. Puerto Llano ( Ref: 80627)
Applicaction: Service & Instrumentaion control
– Segment Market: Chemical / O&G
– Flow: 4,477 Nm3/h
– Working Pressure: 7.5 Barg
– Inlet Tº: 37ºC
– Dew Point: -40ºC
Solution:
– Units: 1
– Prefilter + Heated Adsorption Dryer ( ED-14)+Post Filter
– ASME VIII Div 1 , ATEX Instrumentation
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Spain
EPC: FLUOR
Customer: Repsol petróleo. Cartagena
Application : Service & Instrumentation Control
– Segment Market: Chemical / O&G
– Flow: 4,600 Nm3/h
– Working Pressure: 7.9 Barg
– Inlet Tº: 40ºC
– Dew Point: -57ºC
Solution:
– Units: 1
– Duplex Pre-filter + Heated Adsoprtion Dryer (TP-2000-DHP) + Duplex Post Filter.
– Zero purge Solution
– Plug & Play Solution. Controller Included
– ASME VIII Div 1 + U stamp, ATEX Instrumentation
– Country: Spain
EPC: INTECSA
Applicaction: Service & Instrument control
– Segment Market: Oil & Gas
– Flow: 2,838 Nm3/h
– Working Pressure: 8.6 Barg
– Inlet Tº: 38ºC
– Dew Point: -20ºC
Solution:
– Units: 3
– Dúplex Pre filter +External Heated Adsorption Dryer (TP-1000) + Duplex Post Filter . Zero purge
– ATEX Instrumentation
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Spain
Project: Ghiza North ( Egypt)
EPC: PGESCo.
Application: Service & Instrument control
– Segment Market: O&G
– Flow: 1,375 Nm3/h
– Working Pressure: 9 Barg
– Inlet Tº: 35ºC
– Dew Point: -40ºC
Solution:3 projects
– Units: 3 times 4 units ( 12 units)
– Pre filter + Heatless Adsorption Dryer (HD-08)+ Post Filter
– ASME VIII Div 1 + U Stamp
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Egypt
Customer: REPSOL ( ref.80762)
EPC: SENER
Application: Service & Instrument control
– Segment Market: Oil & Gas
– Flow: 900 Nm3/h
– Working Pressure: 7.5 Barg
– Inlet Tº: 45ºC
– Dew Point: -40ºC
Solution:
– Units: 1 ( 2 Steps: Refrigeration + Adsorption)
– Pre filter (1µ)+Refrigertaror (RFL-160 ) +Heated Adsorption Dryer (ED-08)+ Post Filter (1µ)
– ASME Section VIII Div 1
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Spain
Customer: YPF
EPC: TECHNIP
Application: Service & Instrument control
– Segment Market: O&G
– Flow: 6,200 Nm3/h
– Working Pressure: 8.1 Barg
– Inlet Tº: 41ºC
– Dew Point: -36ºC
Solution:
– Units: 1
– External Heated Adsorption Dryer (TP-3000-DHP) . Zero Purge
– ASME VIII Div1 + U Stamp
– Instrumentation & Control Included
– Plug & Play Solution
Project: Touatgaz ( Argelia)
EPC: TECNICAS REUNIDAS
Application: Service & Instrument control
– Segment Market: Oil & Gas
– Flow: 1,100 Nm3/h
– Working Pressure: 8 Barg
– Inlet Tº: 60ºC
– Dew Point: -20ºC
Solution:3 projects
– Units: 3
– Pre filter +Heatless Adsorption Dryer (HD-13)+ Post Filter. ( StSt Piping)
– ASME VIII Div 1, AHR Compliance
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Argelia
Project: YARA Plant (Australia)
EPC: TECNICAS REUNIDAS
Application: Service & Instrument control
– Segment Market: Oil & Gas
– Flow: 1,369.5 Nm3/h
– Working Pressure: 8.5 – 10 Barg
– Inlet Tº: 10 – 45ºC
– Dew Point: -41ºC
Solution:
– Units: 2
– Buffer Tank + Pre filter + Heatless Adsorption Dryer (HD-08)+ Post Filter
– ASME VIII Div 1 + U Stamp
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Australia
Project: Gran Chaco ( Bolivia)
EPC: TECNICAS REUNIDAS
Application: Service & Instrument control
– Segment Market: Chemical / O&G
– Flow: 1.310 Nm3/h
– Working Pressure: 7.3 Barg
– Inlet Tº: 53ºC
– Dew Point: -40ºC
Solution:
– Units: 2
– Pre filter +Heatless Adsorption Dryer (HD-13) + Post Filter
– ATEX Instrumentation
– Instrumentation & Control Included
– Plug & Play Solution
– Country: Bolivia
Customer: KUWAIT OIL Company
Application: Inertitation of Tanks
Solution:
– Segment Market: O&G
– Equipment: 1 x Nitrogen Generator
– Flow: 120 Nm3/h
– Purity: 99,5%
– Country: Kuwait
Ref: 80.694
Client: BP OIL
Application: Instrumentation Air
Flow: 750 Nm3/h
Working Pressure: 7 bar(g)
Inlet Tª: 40 ºC
Solution: One Absolute filter
DBN-05 PN10
Placed: Castellón (Spain)
EPC: Veolia
End User : BP Oil
Application: Injection Water
– Unitary Flow: 8890 m3/h
– Water Quality: Brackish Water
– Use: To increase Oil Reservoir Pressure
Solution:
– Atomatic Self Cleaning Filter (MEGA 1400), Skid Mounted – Units: 7+1
– Filtration Degree: 10 microns
– Materials: Body – CS Internal Rubber Lining+Special external Coating – Internal: StSt904L
– Design Code: ASME Sec VIII Div I, U Stamp
– Country: DUBAI
Case Study
The Need: Brackish Water Filtration
– The oil reservoir utilizes injected brackish water to increase the oil pressure
– To eliminate the risk of injection nozzles blockage, a pre-injection filtration process is required.
The Solution: Mega 1400 Automatic Electric filters
– Veolia Dubai selected the Yamit Mega 1400 Automatic Electric Self Cleaning Suction Fine Screen Filter
– The filters were provided skid mounted for fast installation on site and were design was ASME (VIII Div I) ‘U’ stamped
Customer: MEARSK Oil Drill
Applicaction: RO Membrane protection -Injection Water
– Unitary Flow: 300 m3/h
– Water Quality: Sea Water
Solution:
– Automatic Hydraulic Self Cleaning (Filter AF-208), ExProof
– Filtration Degree: 80 microns
– Materials: SMO254, Titanium & Marine Bronze, StSt316L
– Especial: Skid Mounted
– Country: Qatar
Case Study:
The Need: Seawater Pre-Filtration for RO
– Maersk Oil drill platform located of the shore of Katar utilizes desalinated sea water oil extraction process for injection into the drilling site.
– The system was designed to include filters to ensure removal of any impurities, such as shells, algae and suspended solids
– The filtration solutions had to be space, energy and operations efficient, with anti corrosion features
The Solution: AF-208 Automatic hydraulic filters
– The filter was designed to work at a 300m3/h capacity with a filtration degree of 80 µm
– The filter is mounted on an explosion proof enclosure and built from corrosion resistant structural materials
– The power consumption of the filter is significant low, due to the use of the hydraulic power of the water for cleaning
Customer: ENDESA
Application: Air & Instrumentation
– Segment Market: Energy
– Flow: 900 Nm3/h
– Working Pressure: 8 Barg
– Inlet Tº: 40ºC
– Dew Point:-54ºC
Solution:
– Units: 1
– Revamping Adsorption Dryer plus filters+ New controller (HD-08)
– Country: Spain
Application: Air & Instrumentation
– Flow: 4.800 Nm3/h
– Working Pressure: 6 Barg
– Inlet Tº: 35ºC
– Dew Point:+3ºC
– Condenser Water: 20m3/h
Solution:
– Units: 1
– Revamping Refrigerator Dryer + New controller (FD-3000-W)
– Country: Spain
Application: Air & Instrumentation
– Segment Market: Energy
– Flow: 7.500 Nm3/h
– Working Pressure: 7 Barg
– Inlet Tº: 32ºC
– Dew Point:+3ºC
Solution:
– Units: 2
– Revamping Refrigerator Dryer + New controller (FD-2005)
– Country: Spain
Application: Air for Process
– Flow: 1.480 Nm3/h
– Working Pressure: 40 Barg
– Inlet Tº: 40ºC
– Dew Point:+3ºC
Solution:
– Units: 2
– Revamping Refrigerator Dryer plus filters+ New controller (FD-305-W)
– Country: Spain
Application: Air & Instrumentation
– Flow: 7000 Nm3/h
– Working Pressure: 3,8 Barg
– Inlet Tº: 130ºC
– Dew Point:+3ºC
– Condenser Water: 14 m3/h
Solution:
– Units: 1
– Revamping Refrigerator Dryer (FD-2505-W)
– Country: Spain
Project: Reference H218
Application: Revamping
– Segment Market: Food & Beverage
– Flow: 255 Nm3/h
– Working Pressure: 7 Barg
– Inlet Tº: 40ºC
– Dew Point: +3ºC
Solution:
– Units: 1
– Revamping Refrigerator Dryer (FD-255-W PN10)
– Country: Spain
Application: Blowing
– Flow: 11.500 Nm3/h
– Working Pressure: 3.2 Barg
– Inlet Tº: 40ºC
– Dew Point:+3ºC
– Condenser Water: 30m3/h
Solution:
– Units: 1
– Revamping Refrigerator Dryer + New controller (FD-4500-W)
– Country: Spain
Application: Biogas Treatment
– Flow: 375 Nm3/h
– Working Pressure: 200 mbar(g)
– Inlet Tº: 45ºC
– Dew Point:+3ºC
– Condenser Water: 2.5m3/h
Solution:
– Units: 1
– Revamping Refrigerator Dryer + New controller (FD-255-W)
– Country: Spain
Application: Air & Instrumentation
– Segment Market: Energy
– Flow: 1.920 Nm3/h
– Working Pressure: 7 Barg
– Inlet Tº: 40ºC
– Dew Point:-20ºC
Solution:
– Units: 2
– Revamping Heated Adsorption Dryer plus filters+ New controller (ED-10)
– Country: Spain
Application: Air & Instrumentation
– Segment Market: Energy
– Flow: 1.200 Nm3/h
– Working Pressure: 7 Barg
– Inlet Tº: 40ºC
– Dew Point:-20ºC
Solution:
– Units: 4
– Revamping Adsorption Dryer plus filters+ New controller (ED-08)
– Country: Spain
Ref: 80.857
Contractor: PEUGEOT-CITRÖEN (VIGO)
Application: Plant Air
Flow: 2000 m3/h
Working Pressure: 12 bar(g)
Inlet Tª: 35 ºC
Solution: Separator Prefilter and postfilter for Refrigeration Dryer unit.
CSN-08_FBN-08
Placed: Vigo (Spain)
Ref: 80.842 and 80.843
Contractor: LYON DEL BASELL
Application: Instrumentation Air
Flow: 3.2000 Nm3/h
Working Pressure: 7 bar(g)
Inlet Tª: 40 ºC
Solution: Separator Prefilter and Absolute Prefilter for adsorption dryer unit
CSN-12 and DBN-12
Placed: Tarragona (Spain)
Ref: 32.645 and 32.646
Client: DUPONT
Application: Air for PET Plant
Flow: 911 Nm3/h
Working Pressure: 40 bar(g)
Inlet Tª: 40 ºC
Solution: Absolute Postfilter and Activated filter for Refrigeration Dryer unit.
DBN-05 and FBN-05
Placed: Asturias (Spain)
Ref: 33.2241 to 33.224
Contractor: Abengoa
Application: Cogeneration
Fluid: Dry natural gas
Flow min. / max.: 31.572 kg/h (42.400 m3/h)
Working Pressure: 20 bar(g)
Inlet Tª: 80 ºC
Solution: 3 separator filters for Natural Gas.
3 x FFN-14 PN40
Placed: México
Ref: 80.814 and 80.815
Contractor: AIR LIQUIDE
Application: Instrumentation Air (for Sabic Plant)
Flow: 4.650 Nm3/h
Working Pressure: 7 bar(g)
Inlet Tª: 40 ºC
Solution: Two Separator Prefilters for two adsorption dryer units
2 x CSN-12
Placed: Cartagena (Spain)
Ref: 80.748
Contractor: ALMIRALL
Application: Process Air
Flow: 3.000 m3/h
Working Pressure: 7 – 10 bar(g)
Inlet Tª: 38 ºC
Solution: Two Separator Prefilter for Adsorption Dryer units.
Two CSN-09 PN10
Placed: Sant Andreu de la Barca (Spain)
Ref: 33.783 to 33.790
Contractor: Duro Felguera
Application: Cogeneration
Flow min. / max.: 10.500 kg/h / 26.000 kg/h
Min. / Max. Working Pressure: 16 /32 bar(g)
Inlet Tª: 80 ºC
Solution: 8 separator filters for Natural Gas.
8 x FFN-14 PN40
Placed: Argentina
Air
Ref: 80.493
Contractor: ELECNOR
Client: CARBUROS DEL CINCA
Application: Cogeneration
Fluid: Poor Gas
Flow: 2.500 m3/h
Working Pressure: 60 mbar(g)
Inlet Tª: 30 ºC (60%Hrel.)
Solution: 3 Gas filter for separation of particles
2 x FFN-20
Placed: Monzón (Spain)
Ref: 80.782
Contractor: GRUPOTEC
Application: Cogeneration
Fluid: Methane gas
Flow: 600 m3/h
Inlet working pressure: 80 mbar(g)
Allowed drop pressure: 20 mbar(g)
Inlet Tª: 20 ºC (Dew point: 5 ºC.)
Solution: 2 parallel Gas filter activated carbon for remove siloxanes. Estimated duration for 5 or 6 months/each one.
2 x AFB-20
Placed: Murcia (Spain)
Ref: 80.381
Contractor: Miquel COSTAS & MIQUEL
Application: Process Air
Flow: 1.200 m3/h
Working Pressure: Atmospheric pressure
Inlet Tª: 35 ºC (60%Hrel.)
Solution: Inlet filter for Refrigeration dryer unit.
FBN-36
Placed: Santa Coloma de Gramanet (Spain)
End user: PSA PEUGEOT-CITROËN
Application: Air treatment before Adsortion dryer.
– Unitary Flow: 3.200 /h
– Working Pressure: 4 Bar(g)
– Inlet Temperature: 170ºC
– Outlet Temperature: 30ºC
Solution:
– Units:1
– Het Exchanger Air-Water RH-857-1250
– Country: Spain
Ref: 80.898 y 80.899
Client: MOLISUR (META Group)
Application: Reduce Temperature pneumatic air for flour transportation
Flow: 23 m3/min. (1.380 m3/h) / 55 m3/min. (3.300 m3/h)
Working Pressure: / 0,5 bar(g)
Max. Ambient Tª: 48 ºC (65%)
Inlet Tª: 92 ºC
Outlet Tª: 60 ºC
Drop pressure: < 20 mbar / < 40 mbar
Altitude: 25 m
Solution:
AA-42/5/1500/E y AA-2/30/5/1800/E (ATEX II 3D Zona 22 certified)
Placed: Sevilla (Andalucia) - Spain
Ref: 80.631 and 80.632
Contractor: BÜHLER
Application: Pneumatic transport
Working Pressure: 0,9 Kg/cm2
Inlet Tº: 125 ºC
Outlet Tª: 40 ºC
Altitude: 50 m
Solution:
AA-40/3/1200 and AA-30/3/1200 (ATEX certified)
Placed: Arevalo (Ávila) – Spain
Ref: 80.772 and 80.773
Contractor: BÜHLER
Application: Reduce Temperature pneumatic air for flour transportation
Flow: 30 m3/min / 55 m3/min
Working Pressure: 0,6 Kg/cm2 and 0,79 Kg/cm2
Inlet Tº: 80 / 98 ºC
Outlet Tª: 40 ºC
Pressure drop: 0,05 bar
Altitude: 50 m
Solution:
AA-46/1700/E and AA-230/2250/E (ATEX certified)
Placed: Almenara (Castellón) – Spain
Ref: 80.767
Contractor: BÜHLER
Application: Reduce Temperature pneumatic air for flour transportation
Flow: 66,5 m3/min. (3.990 m3/h)
Working Pressure: 1,05 bar(g)
Inlet Tª: 110 ºC (HRel.60%)
Outlet Tª: 35 ºC
Altitude: 767 m
Solution:
AA-236-2400-E (ATEX II 3D Zona 22 certified)
Placed: Spain
Ref: 80.534
Contractor: PEDRO GIL
Application: Reduce Temperature pneumatic air for flour transportation
Flow: XX m3/h
Working Pressure: 0,9 bar(g)
Inlet Tª: 125 ºC (saturated)
Outlet Tª: 40 ºC (Hrel100%)
Altitude: 50 m
Solution:
AA-40/5/1500/E
ATEX certified
Placed: Placed: Vilassar de Dalt (Catalonia) – Spain
Customer: ALUDIUM
Solution:
– Segment Market: Steel Industry ( Aluminium)
– Units: 4
– Equipment: Nitrogen Generator
– Flow: 240 Nm3/h
– Purity: 99.5%
– Country: Spain
Customer: JOHSON CONTROLS
Solution:
– Segment Market: Electronic Industry
– Units: 3
– Equipment: Nitrogen Generator
– Flow: 210 Nm3/h
– Purity: 99.5%
– Country: Mexico
Customer: NANIUM
Solution:
– Segment Market: Semiconductor Industry
– Units: 1
– Equipment: Nitrogen Generator
– Flow: 240 Nm3/h
– Purity: 99.5%
– Country: Portugal
Customer: QUANTAL
Application: Laser Cutting
Solution:
– Segment Market: Automotive Industry
– Units: 1
– Equipment: Nitrogen Generator
– Flow: 240 Nm3/h
– Purity: 99.5%
– Country: Portugal
Customer: Industrial
Application: Cooling water and UV protection
– Unitary Flow: 120 m3/h
– Working Pressure: 10 bar(g)
– Water Quality: Cooling
Solution:
– Units: 3 + 1 Controller
– Automatic Electric Self Cleaning Filter (AF806XLP)
– Filtration Degree: 120-80-50 microns
– Body: CS epoxy coated
Customer: Fluxys
Application: Fire Emergency
– Unitary Flow: 12,000 m3/d
– Working Pressure: 16 bar(g)
– Water Quality: treated Seawater
Solution:
– Units: 4
– Atomatic Hydraulic Self Cleaning Filter (AF-816PR PN16)
– Filtration Degree: 300 microns
– Body: CS with phenolic coating. Zink Inoized protection.
– Country: Belgium
Customer: Veolia
Application: Cooling Tower side stream
– Unitary Flow: 1800 m3/d
– Working Pressure: 10 bar(g)
– Water Quality: Cooling Circuit
Solution:
– Units: 1
– Automatic Hydraulic Self Cleaning Filter (AF-816XLP )
– Filtration Degree: 80 microns
– Body: CS Steel epoxy coated body / HDPE manifold
– Country: Belgium
The Need:
– Removal of suspended solids to reduce under-deposit corrosion and biological growth
– Reduction of water pipes contamination and improved.
– Minimize maintenance, downtime, and water loss.
Customer: ABENGOA Chile
Application: Pre UF membrane protection
– Unitary Flow: 550 m3/d
– Working Pressure: 10 bar(g)
– Water Quality: Sea Water
Solution:
– Units: 1+1
– Atomatic Electric Self Cleaning Filter (AF-912 )
– Filtration Degree: 150 microns
– Body: External : CS phenolic coated / INternal: Rubber Lined
– Country: Chile
Customer: Industrial
Application: Industrial Wastewater from casting process
– Unitary Flow: 440 m3/h
– Working Pressure: 10 bar(g)
– Water Quality: Industrial Waste Water
Solution:
– Units: 1
– Automatic Electric Self Cleaning Filter (AF-9808)
– Filtration Degree: 120 microns
– Body: CS epoxy coated
– Design Code: Motor and controller ( Eex Proof)
Customer: WWTP
Applicaction:Reduction of COD
– Equipment: Oxigen Generator
– Units: 3
– Flow: 50 Nm3/h
– Purity: 90%
Customer: TAMINCO ( International Manufacturer of Alkylamines and derivates )
Application: UF Membrane protection
– Segment Market: Chemical / Water
– Use: Process Water
– Unitary Flow: 250 m3/h
– Water Quality: Canal Water
Solution:
– Units: 1
– Automatic Hydraulic Self Cleaning Filter (AF-800) – Skid Mounted
– Filtration Degree: 120 microns
– Material: CS Body , StSt316L Internals
– Country: Mexico
The Need: Pre treatment for Ultra Filtration Membranes
– The plant utilizes Canal water treated to a level of Ultra Pure Water to ensure reliability of production process.
– The client’s engineering team has defined the use of Ultra Filtration membranes as the main treatment method with a requirement to protect the UF membranes from blockage.
The Solution: AF-800 Automatic hydraulic filters
– Taminco selected the Yamit Automatic Hydraulic self cleaning filters as – it’s UF pre-treatment solution.
– The power consumption of the filter is significant low, due to the use of the hydraulic power of the water for cleaning
– Due to the high quality of the filtered water, the UF membranes were able to perform for long periods with less backwash sequences and minimum CIP procedures.
Customer: Minera Esperanza ( Copper and Gold Mining)
Application: UF Membrane protection
Solution:
Case Study:
The Need: Provide filtered seawater for the mine
The Solution: AF-900 Automatic hydraulic filters
EPC: Veolia
End User : BP Oil
Application: Injection Water
– Unitary Flow: 8890 m3/h
– Water Quality: Brackish Water
– Use: To increase Oil Reservoir Pressure
Solution:
– Atomatic Self Cleaning Filter (MEGA 1400), Skid Mounted – Units: 7+1
– Filtration Degree: 10 microns
– Materials: Body – CS Internal Rubber Lining+Special external Coating – Internal: StSt904L
– Design Code: ASME Sec VIII Div I, U Stamp
– Country: DUBAI
Case Study
The Need: Brackish Water Filtration
– The oil reservoir utilizes injected brackish water to increase the oil pressure
– To eliminate the risk of injection nozzles blockage, a pre-injection filtration process is required.
The Solution: Mega 1400 Automatic Electric filters
– Veolia Dubai selected the Yamit Mega 1400 Automatic Electric Self Cleaning Suction Fine Screen Filter
– The filters were provided skid mounted for fast installation on site and were design was ASME (VIII Div I) ‘U’ stamped
Customer: MEARSK Oil Drill
Applicaction: RO Membrane protection -Injection Water
– Unitary Flow: 300 m3/h
– Water Quality: Sea Water
Solution:
– Automatic Hydraulic Self Cleaning (Filter AF-208), ExProof
– Filtration Degree: 80 microns
– Materials: SMO254, Titanium & Marine Bronze, StSt316L
– Especial: Skid Mounted
– Country: Qatar
Case Study:
The Need: Seawater Pre-Filtration for RO
– Maersk Oil drill platform located of the shore of Katar utilizes desalinated sea water oil extraction process for injection into the drilling site.
– The system was designed to include filters to ensure removal of any impurities, such as shells, algae and suspended solids
– The filtration solutions had to be space, energy and operations efficient, with anti corrosion features
The Solution: AF-208 Automatic hydraulic filters
– The filter was designed to work at a 300m3/h capacity with a filtration degree of 80 µm
– The filter is mounted on an explosion proof enclosure and built from corrosion resistant structural materials
– The power consumption of the filter is significant low, due to the use of the hydraulic power of the water for cleaning
Customer: Industrial
Application: Cooling water and UV protection
– Unitary Flow: 120 m3/h
– Working Pressure: 10 bar(g)
– Water Quality: Cooling
Solution:
– Units: 3 + 1 Controller
– Automatic Electric Self Cleaning Filter (AF806XLP)
– Filtration Degree: 120-80-50 microns
– Body: CS epoxy coated
Customer: SADACI
Application: Cooling protection
– Unitary Flow: 150 m3/d
– Working Pressure: 10 bar(g)
– Water Quality: Cooling Circuit
Solution:
– Units: 1+1
– Atomatic Hydraulic Self Cleaning Filter (AF-808PR )
– Filtration Degree: 300 microns
– Body: External : CS epoxy coated
– Country: Belgium